Sale ends soon!
Specifications: Type: Oxygen Facial Machine Plug: US Plug Package Weight: 880g Operation: 1. Take out the machine, connect the power. 2. Connect the injection gun to the oxygen tube. 3. Turn on the red power switch on the machine surface. 4. When there is ‘buzzing’ sound behind the machine, the machine starts work. 5. Open the cap of the injection gun, pouring liquid products such as whitening moisturizer into the gun. (Note: Can only hold the liquid products without viscousness or water.) 6. Press switch of the injection gun,it will start spray. (The structure of the injection gun is showed on the injection gun structure instruction.) Package Included: 1 x Host 1 x Airbrush 1 x Adapter 1 x Connecting Wire 3 x Accessories Warning: 1. Do not use corrosive products to clean the machine. 2. Check the power supply that connected to the instrument is stable before using. 3. Ensures the correct connection of the accessories and turn off the power after use. 4. Do not allow water or other liquids to enter the host machine. 5. When encounter troubles, please cut off the power supply. 6. Please contact the seller or contact us when the machine break down. 7. When use the injection gun, connect the gun to the host machine after being prepared and then start the pump. Immediately use the injection when start it, if there is a need to stop it during use, please turn off the pump or pull out the injection gun. There is a need to turn off the pump and pull out the injection gun after use, so as not to disconnect the inner tube due to the excessive pressure. The injection gun is precision part, washing it immediately after use and adding pure water into the gun sprayer, let it spray.